Circuit board: Difference between revisions
Jump to navigation
Jump to search
George Swan (talk | contribs) (George Swan moved page Circuit board to Circuit board/Definition: misplaced) Tag: New redirect |
George Swan (talk | contribs) (first draft) Tag: Removed redirect |
||
| Line 1: | Line 1: | ||
[[File:Point to point wiring.jpg | left | thumb | Circuit boards in the time before [[Integrated circuit]]s, relied on separate electrical and mechanical connection between components.]] | |||
[[File:Printed Circuit Board 2.jpg | thumb | Modern circuit boards almost always mount all, or almost all, of the components on a single side.]] | |||
[[File:Medion MD8910 - main printed circuit board-8002.jpg | thumb | The bottom of a circuit board. The hundreds of spots of [[solder]] mark where components are attached, on the other side. Note the metal traces. The board has more layers of traces sandwiched together, allowing electrical connections to pass over other connections.]] | |||
A '''circuit board''' holds electrical components firmly together, and provides an electrical connection between those parts. | |||
In the days before [[Integrated circuit]]s the board would just be a board, possibly with holes piercing it, to allow wires to pass through. The [[vacuum tube]]s, [[Resistor]]s and [[capacitor]]s on the board would get their connection to the appropriate other components via a rat's nest of individual wires. | |||
Modern circuit boards, sometimes called "printed circuit boards" are manufactured in a sandwich of layers, with electrical paths bonded to each layer. | |||
Revision as of 20:29, 5 January 2024
Circuit boards in the time before Integrated circuits, relied on separate electrical and mechanical connection between components.
The bottom of a circuit board. The hundreds of spots of solder mark where components are attached, on the other side. Note the metal traces. The board has more layers of traces sandwiched together, allowing electrical connections to pass over other connections.
A circuit board holds electrical components firmly together, and provides an electrical connection between those parts.
In the days before Integrated circuits the board would just be a board, possibly with holes piercing it, to allow wires to pass through. The vacuum tubes, Resistors and capacitors on the board would get their connection to the appropriate other components via a rat's nest of individual wires.
Modern circuit boards, sometimes called "printed circuit boards" are manufactured in a sandwich of layers, with electrical paths bonded to each layer.