Tap (tool): Difference between revisions
Jump to navigation
Jump to search
imported>Howard C. Berkowitz (New page: A '''tap''' is a tool, usually of very hard metal, which is used to cut threads into the sides of a predrilled hole. These threads accepts a threaded fastener such as a [[screw (fastener)...) |
imported>Howard C. Berkowitz No edit summary |
||
| Line 1: | Line 1: | ||
{{subpages}} | |||
A '''tap''' is a tool, usually of very hard metal, which is used to cut threads into the sides of a predrilled hole. These threads accepts a threaded fastener such as a [[screw (fastener)|machine screw]] or [[bolt (fastener)]]. | A '''tap''' is a tool, usually of very hard metal, which is used to cut threads into the sides of a predrilled hole. These threads accepts a threaded fastener such as a [[screw (fastener)|machine screw]] or [[bolt (fastener)]]. | ||
Tapping can be done by hand or motor power. In general, a machine, such as a [[drill press]], is preferable in order to keep the tap in perfect vertical alignment with the hole, and to maintain a steady level of pressure. Besides the problem of making irregular threads, an out-of-alignment tap can break the tap, which is made from hard but brittle material. | Tapping can be done by hand or motor power. In general, a machine, such as a [[drill press]], is preferable in order to keep the tap in perfect vertical alignment with the hole, and to maintain a steady level of pressure. Besides the problem of making irregular threads, an out-of-alignment tap can break the tap, which is made from hard but brittle material. | ||
The most common means of hand-powering a tap is by use of a ''tap wrench'', which has an adjustable set of jaws for holding the tap, and a T-shaped handle for turning the wrench-tap assembly. | |||
Revision as of 12:22, 1 June 2009
A tap is a tool, usually of very hard metal, which is used to cut threads into the sides of a predrilled hole. These threads accepts a threaded fastener such as a machine screw or bolt (fastener).
Tapping can be done by hand or motor power. In general, a machine, such as a drill press, is preferable in order to keep the tap in perfect vertical alignment with the hole, and to maintain a steady level of pressure. Besides the problem of making irregular threads, an out-of-alignment tap can break the tap, which is made from hard but brittle material.
The most common means of hand-powering a tap is by use of a tap wrench, which has an adjustable set of jaws for holding the tap, and a T-shaped handle for turning the wrench-tap assembly.