Hydrogen sulphide

File:Hydrogen sulride.png

Hydrogen sulphide (or hydrogen sulfide) is a chemical compound with the formula H₂S. It is a colourless, highly toxic, flammable gas with a characteristic foul odour.

Hydrogen sulphide is present in very large amounts in raw natural gas and also occurs in large amounts during the refining of petroleum crude oil. In fact, the vast majority of the 66,000,000 metric tons of elemental sulphur produced worldwide in 2006 was by-product sulphur from petroleum refining and natural gas processing plants. It is also present in volcanic gases and some water well sources

It also occurs in swamps and sewers as a result of the bacterial breakdown of organic matter in the absence of oxygen, which is known as anaerobic digestion.

Properties Property Value Common name hydrogen sulphide Other names hydrogen sulphide, dihydrogen sulphide, sulphur hydride, sewer gas IUPAC name hydrogen sulphide CAS number 7783-06-04 Molecular formula H2S Molecular mass 34.082 g/mol Melting point −85.47 °C Normal boiling point −60.35 °C and 1 atm Critical point 100.38 °C at 88.46 atm Heat of fusion 69.74 kJ/kg at −85.47 °C and 1 atm Heat of vaporisation 517.87 kJ/kg at −60.35 °C and 1 atm Liquid density 914.9 kg/m3 at −60.35 °C and 1 atm Gas density 1.93 kg/m3 at −60.35 °C and 1 atm, 1.411kg/m3 at 20°C and 1 atm Gas specific heat, cp 1.005 kJ/(kg·K) at 25 °C and 1 atm Gas specific heat ratio, cp/cv 1.32 at 25 °C and 1 atm Gas Viscosity 126.02 micropoise at 25 °C

Chemical properties

Hydrogen sulphide is a highly toxic and flammable gas (flammability range: 4.0 to 46 volume % in air). It is heavier than air and tends to accumulate at the bottom of poorly ventilated, confined spaces.

Hydrogen sulphide and oxygen burn to form sulphur dioxide (SO₂) and water. In general, hydrogen sulphide acts as a reducing agent.

At high temperature (about 1000 °C) and with the use of a catalyst, sulphur dioxide will react with hydrogen sulphide to form elemental sulphur and water (in the form of steam). This is commonly accomplished by the Claus process, the primary method of converting hydrogen sulphide into elemental sulphur.

Hydrogen sulphide is readily soluble in water, amounting to 4.1 grams per litre of water at 20 °C which is equivalent to 0.41 weight %. When it is in solution in water, the H₂S forms a weak acid (sometimes referred to as hydrosulphuric acid) containing hydrosulphide and sulphide ions (HS⁻ and S²⁻). The solubility is further enhanced in alkaline solutions due to increased ionisation.

Hydrogen sulphide reacts with metal ions to form metal sulphides, which may be considered the salts of hydrogen sulphide. Some minerals are sulphides.

Hydrogen sulphide reacts with alcohols to form thiols.

Toxicity

Hydrogen sulphide is considered a broad-spectrum poison, meaning that it can poison several different systems in the body, although the nervous system is most affected:

• 0.00047 ppmv is the recognition threshold, the concentration at which 50% of humans can detect the characteristic foul odour of hydrogen sulphide.
• At 100 – 150 ppmv, the olfactory nerve is paralyzed after a few inhalations, and the sense of smell disappears, often together with awareness of danger.
• At 200 ppmv, the central nervous system is depressed.
• At 500 ppmv, the cardiovascular system is depressed.
• At 1000 ppmv, the central nervous system is paralyzed and death occurs.