Locator-ID Separation Protocol

From Citizendium
Jump to navigation Jump to search
This article is developing and not approved.
 Main Article
 Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
https://en.citizendium.org/wiki/index.php?title=Locator-ID_Separation_Protocol&printable=yes
This editable Main Article is under development and subject to a disclaimer.

The Locator-ID separation protocol (LISP) is an experimental networking protocol in the Internet Engineering Task Force draft stage.[1] It allows incremental introduction of IPv6 into the existing IPv4 core, by separating the mapping of routing locators from endpoint identifiers. It also can be used purely for IPv6.

LISP was developed by Cisco Systems engineers, but is being developed as an open standard and Cisco takes no intellectual property rights. [2]

References

  1. ↑ D. Farinacci, V. Fuller, D. Meyer, D. Lewis (25 April 2010), Locator/ID Separation Protocol (LISP), draft-ietf-lisp-07, Internet Engineering Task Force
  2. ↑ Cisco LISP Frequently Asked Questions, Cisco Systems
Retrieved from "https://citizendium.org/wiki/index.php?title=Locator-ID_Separation_Protocol&oldid=758415"